Festo CPX-FB13 - Page 93

2. Commissioning
2−53
Festo P.BE−CPX−FB13−EN en 0811c
Note
When using the Filter diagnosis message V
OUT
/V
VAL
" and
Analogue process value presentation" parameters, pay
attention to the required modification of the CPX−FB13 in
the following table.
If you use a field bus node with a version earlier than
required together with a current GSD, the parameters are
displayed in STEP 7, but they have no effect.
Parameters
Required version
CPX−FB13
Filter diagnosis message V
OUT
/V
VAL
Rev 24
Analogue process value presentation Rev 23
Tab.2/19: Required version of the CPX−FB13 for use of
parameters