1. Summary of components
1-25
Festo P.BE-MPA-EN en 1108e
Vertical pressure shut-off plate
With the vertical pressure shut-off plate, operating pressure
for a valve can be switched off separately. As a result, for
example, changing of the valve is possible without having to
switch off operating pressure for the valve terminal.
The circuit symbol of the vertical pressure shut-off plate can
be found in Appendix B, Tab. B/7.
Instructions on installati o n of the vertical pressure shut-off
plate can be found in the assembly instructions VMPA1-HS.
To Next Page
Loading...
