1. Introduction
© Festo Didactic 655633 65
In principle all our „Terms and Conditions of Sale“ apply. These are available to the
operating authority upon conclusion of the contract at the latest. Warranty and
liability claims for persons or material damage are excluded if these can be traced
back to one or several of the following causes:
• Use of the MPS
not in accordance with its intended purpose
• Incorrect assembly, commissioning, operation and maintenance of the MPS
• Operation of the MPS
using faulty safety equipment or incorrectly fitted or non
operational safety or protective devices
• Non observance of notes in the manual regarding transport, storage, assembly,
commissioning, operation, maintenance and setting up of the MPS
• Unlawful constructional modifications on the MPS
• Inadequate monitoring of components subject to wear
• Incorrectly carried out repairs
• Catastrophies as a result of foreign bodies and vis major.
Festo Didactic herewith rules out any liability for damage or injury to trainees, the
training company and/or other third parties which may occur during the
use/operation of the system other than purely in a training situation, unless such
damage has been caused intentionally or due to gross negligence by Festo Didactic.
This system has been developed and produced exclusively for vocational and further
training in the field of automation and technology. The training authority and/or the
instructors is/are to ensure that trainees observe the safety precautions described
in the manual provided.
The use of the system for its intended purpose also includes:
• following all advice in the manual and
• carrying out inspection and maintenance work.
1.6
Warranty and liability
1.7
Intended use
To Next Page
Loading...
