Festo MPS - Festo Controller

6. Commissioning
© Festo Didactic 655633 99
6.10.2 Festo controller
• Controller: Festo FEC FC640, IPC CPU HC02, IPC CPU HC20
• Programming software: Festo FST Version 4.02
1. Connect PC and PLC using the TTL-RS232 programming cable
2. Switch on power supply unit
3. Switch on the compressed air supply
4. Release the EMERGENCY-STOP pushbutton (if available)
5. Wait until the PLC has carried out its test routines
6. Start the PLC programming software
7. Restore the file 04HA_FEC.zip from the directory
Sources\PLC Programs\Release C\FEC of the CD-ROM supplied
Project  Restore …  Open (CD ROM: Sources\PLC Programs\Release C\FEC) 04HA_FEC.zip Open  Restore
Project, Name: 04HA_FEC OK