Festo MPS - Page 87

6. Commissioning
© Festo Didactic 655633 87
10. Switch on the compressed air supply.
11. Check the positions of the end stops.
(position „receptacle/position „slide 2“).
Use the manual override of the solenoid valves to control the linear axis, the
lifting cylinder and the gripper.
Documents
• Data sheets
Proximity sensor SME-8 (150857) in the directory English\4_Handling\Data
sheets on the CD-ROM supplied.
• Operating instructions
Proximity sensor SME-8 (646518) in the directory English\4_Handling\Operating
instructions on the CD-ROM supplied.
• Assembly instructions
Handling station in the directory English\4_Handling\Assembly instructions on
the CD-ROM supplied.