FiberHome AN5506-04 Series User Manual

4
Web Configuration Guide
4.6.2.1
Restoring the Configuration Data
Restore
the configuration of the ONU to the factory configuration,
such as Web login username and password, and wireless network
SSID and password.
1. Select Management in the navigation bar. Select Device
Management→Restore from the left link bar to open the
restoring tab, as shown in Figure 4.46.
Figure
4.46 Configuration Restoring
2
. Click Restore and then click OK in the alert box that appears.
Wait until the configuration data are completely restored.
4.6.2.2
Local Upgrade
Select
the local file and upgrade the ONU software. During upgrade,
do not power off the device or perform other operations to prevent
damage to the device.
1. Select Management in the navigation bar. Select Device
Management→Local Upgrade from the left link bar to open
the local upgrade tab, as shown in Figure 4.47.
Figure
4.47 Local Upgrade
122

FiberHome AN5506-04 Series Specifications

General

Model	AN5506-04 Series
Category	Network Hardware
Type	GPON ONT
Power Supply	12V DC, 1A
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% (non-condensing)
Ports	4 GE ports, 2 POTS ports
WLAN	802.11b/g/n