FiberHome AN5506-04 Series User Manual

4
Web Configuration Guide
T
able 4.7 Parameters for the DHCP Server (Continued)
Item Description
DHCP
Lease Time
The lease time of the IP address pool of the DHCP server.
Option60
Enables or disables the Option 60 property to identify the user
terminal.
Option 60
start IP
The starting IP address of the
network segment of the Option 60
property terminal distributed by the
DHCP server.
This item should be set
when the Option 60
field of the DHCP
server is enabled.
Option 60
end IP
The end IP address of the network
segment of the Option 60 property
terminal distributed by the DHCP
server.
4.3.5
Remote Management
The
TR-069 protocol is a communication specification between the
terminal equipment and the ACS. If the TR-069 automatic service
issue is enabled for the ISP, the configuration of terminals will be
issued automatically by the ACS. The network parameters can be
configured automatically using the TR-069 function provided that the
ACS parameters have been configured on the ONU and the
corresponding configuration on the ACS has been completed. In this
case, users need not configure any parameters on the ONU
manually.
1. Select Network in the navigation bar and select Remote
Management in the left link bar to open the TR-069 basic
configuration tab, as shown in Figure 4.17.
86

FiberHome AN5506-04 Series Specifications

General

Model	AN5506-04 Series
Category	Network Hardware
Type	GPON ONT
Power Supply	12V DC, 1A
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% (non-condensing)
Ports	4 GE ports, 2 POTS ports
WLAN	802.11b/g/n