FiberHome AN5506-04 Series User Manual

4
Web Configuration Guide
T
ip:
Pressing the Apply button will validate a single SSID choice
configuration item. If users does not click Apply after modifying the
SSID 1 setting, the modification will not take effect.
If the SSID1 setting is modified, the factory default wireless network
account will be invalid.
If users lose the customized wireless network account, they can
restore the factory default account (long press the Reset button for
at least 5s).
4.3.1.3
WIFI Control
Configure
the parameters of the wireless network, such as WIFI
power and quantity of connected client ends.
1. Select Network in the navigation bar and select Wlan Settings
→WIFI Control in the left link bar to open the WIFI control
setting tab of the wireless access service, as shown in Figure
4.11.
Figure
4.11 WIFI Control
76

FiberHome AN5506-04 Series Specifications

General

Model	AN5506-04 Series
Category	Network Hardware
Type	GPON ONT
Power Supply	12V DC, 1A
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% (non-condensing)
Ports	4 GE ports, 2 POTS ports
WLAN	802.11b/g/n