FiberHome AN5506-04 Series User Manual

4
Web Configuration Guide
T
able 4.3 Advanced Setting Parameters of Wireless Network (Continued)
Item Description
WPA and WPA2.
WPA
Algo-
rithms
The encryption algorithms include TKIP, AES
and TKIPAES.
This item
should be
set if the
authentica-
tion mode is
WPA-PSK,
WPA2-PSK
or
WPAPSKW-
PA2PS.
Pass
Phrase
Enter the SSID key.
Key
Renewal
Interval
Enter the time interval for key update (unit: s).
Encrypt
Type
Select to enable or disable the WEP encryption when the
network authentication mode is OPEN.
Default
Key
Select Key1 to Key4; that is, select one of the
four configured network keys.
This item
should be
configured
when the
authentica-
tion mode is
OPEN and
the WEP
encryption
is enabled
or the
authentica-
tion mode is
SHARED.
WEP Key
1 to WEP
Key 4
Enter the key value and select the key value
type. At least enter the item selected in Default
Key.
u If ASCII is selected, users should enter 5 to
13 characters for the key value.
u If Hex is selected, users should enter a
hexadecimal figure containing 10 to 26
characters for the key value.
75

FiberHome AN5506-04 Series Specifications

General

Model	AN5506-04 Series
Category	Network Hardware
Type	GPON ONT
Power Supply	12V DC, 1A
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% (non-condensing)
Ports	4 GE ports, 2 POTS ports
WLAN	802.11b/g/n