FiberHome AN5506-04 Series User Manual

4
Web Configuration Guide
T
able 4.2 Basic Parameters of the Wireless Network (Continued)
Item Description
Frequency
(Channel)
The channel used for communication between the
wireless access point and the wireless station. The
options includes AutoSelect, Channel1 to Channel13.
The default setting is AutoSelect.
Frequency
Bandwidth
The width of wireless band. The values include
20MHz/40MHz, 20MHz and 40MHz. The default setting
is 20MHz/40MHz.
4.3.1.2
Advanced Configuration
Configure
the parameters of the wireless network, such as the SSID,
password, security mode and algorithm.
1. Select Network in the navigation bar and select Wlan Settings
→Advanced in the left link bar to open the advanced setting
tab of the wireless access service, as shown in Figure 4.10.
Figure
4.10 Advanced Settings of the Wireless Network
73

FiberHome AN5506-04 Series Specifications

General

Model	AN5506-04 Series
Category	Network Hardware
Type	GPON ONT
Power Supply	12V DC, 1A
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% (non-condensing)
Ports	4 GE ports, 2 POTS ports
WLAN	802.11b/g/n