FiberHome AN5506-04 Series User Manual

4
Web Configuration Guide
4.3.2.1
LAN Settings
Configure
the management IP address and subnet mask at the LAN
side.
1. Select Network in the navigation bar and select LAN Settings
→LAN Settings in the left link bar to open the LAN settings tab,
as shown in Figure 4.13.
Figure
4.13 LAN Settings
2
. Configure the management IP address and subnet mask at the
LAN side. See Table 4.5 for the parameter description.
3. Click Apply to save and apply the configuration.
T
able 4.5 Parameters of LAN Settings
Item Description
IP Address
The management IP address at the LAN side of the ONU.
The default value is 192.168.1.1.
Subnet Mask
The subnet mask of the ONU for the LAN. The default value
is 255.255.255.0.
4.3.2.2
RF Output Level Adjustment
Configure
the RF output level adjustment range.
78

FiberHome AN5506-04 Series Specifications

General

Model	AN5506-04 Series
Category	Network Hardware
Type	GPON ONT
Power Supply	12V DC, 1A
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% (non-condensing)
Ports	4 GE ports, 2 POTS ports
WLAN	802.11b/g/n