EasyManuals Logo

FiberHome AN5506-04 Series User Manual

FiberHome AN5506-04 Series
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #95 background imageLoading...
Page #95 background image
4
Web Configuration Guide
Figure
4.18 OLT Authentication
2
. Configure the parameters as required. Table 4.9 describes the
parameters.
3. Click Apply to save the configuration information. The
configuration will take effect after the ONU is rebooted.
T
able 4.9 Parameters for OLT Authentication
Item Description
Logic SN Sets the logical SN username. This item is
configurable when the
ONU uses the SN
authentication.
Logic
Password
Sets the logical SN password.
Password
authentication
Sets the authentication password when the ONU is
authenticated by password.
4.3.7
IPV6
Configure
the IPv6 static routing.
1. Select Network in the navigation bar. Select IPV6 from the left
link bar and click Add in the information bar that appears at
right part to open the IPv6 static routing table configuration tab,
as shown in Figure 4.19.
89

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FiberHome AN5506-04 Series and is the answer not in the manual?

FiberHome AN5506-04 Series Specifications

General IconGeneral
ModelAN5506-04 Series
CategoryNetwork Hardware
TypeGPON ONT
Power Supply12V DC, 1A
Operating Temperature0°C to 40°C
Storage Temperature-40°C to 70°C
Humidity5% to 95% (non-condensing)
Ports4 GE ports, 2 POTS ports
WLAN802.11b/g/n

Related product manuals