FiberHome AN5506-04 Series User Manual

5
Handling Common Problems
5
Handling Common
Problems
The
following introduces how to handle common router faults.
5.1
The Power Indicator LED Remaining
Off
Handle
according to the procedures below.
1. Check whether the mains supply is normal.
2. Check whether the power adapter matches the device.
3. Check whether the power button is pressed down.
4. Check whether the power cable connection is normal.
5.2
The PON Indicator LED Remaining Off
Handle
according to the procedures below.
1. Check whether the device power supply is normal.
2. Check whether the optical fiber connection is normal.
3. Check whether the ONU has obtained the ISP authorization.
4. Check whether the optical interface is normal; if not, replace the
device.
5.3
The LOS Indicator LED Keeping
Blinking
Handle
according to the procedures below.
129

FiberHome AN5506-04 Series Specifications

General

Model	AN5506-04 Series
Category	Network Hardware
Type	GPON ONT
Power Supply	12V DC, 1A
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% (non-condensing)
Ports	4 GE ports, 2 POTS ports
WLAN	802.11b/g/n