FT-50 Fill Level Inspector Operation Guide
3-4 Industrial Dynamics Company, Ltd. Document 40272-0700
Software Functions List
There are two types of software functions: Status and Operating. Status
Functions display information about the status of a software function or
system component. Pressing the arrow keys has no effect on a Status
Function because it is not a changeable parameter, it only provides current
operating information for a particular software function.
Operating Functions allow you to change software function values
(parameters). Using the arrow keys allows you to change a value, clear an
error, or turn a function on or off.
The following list contains the software functions that are available to the
Operator’s access level. For more information see “Software Function
Descriptions” on page 2-7.
To Next Page
Loading...
