FT-50 Fill Level Inspector Operation Guide
3-10 Industrial Dynamics Company, Ltd. Document 40272-0700
To reset the all counters:
1.
Press
Key 3
until
Reset All Counters
appears.
2.
Press the
Arrow Key
to execute.
Rejector Functions Group
Rejector Status
Disables or enables the reject signal transmitted by the FT-50 to the
rejector. This function also effects the external reject function in the same
way. Although the actual rejection is disabled all counters and alarms
continue to accumulate.
Fire Rejector On Demand
Fires the rejector manually. This function is used to test the rejector
mechanism or to manually activate it during start-up to provide initial
lubrication under no load.
To execute Fire Rejector On Demand:
1.
Press
Key 4
until
Fire Rejector On Demand
appears.
2.
Press the
Arrow Key
to fire the rejector.
To Next Page
Loading...
