Chapter 4: Diagnostics and Troubleshooting
Industrial Dynamics Company, Ltd. Document 40272-0700 4-3
* 33 Smashed Bottle Detection Error-Exceeded Consecutive Reject Limit
* 34 Smashed Bottle Detection Error-False Trigger
* 46 Consecutive External Reject Alarm
47 Encoder Resolution Too Low
* 48 AC Input Voltage Low, Brownout Detected
* 49 User Defaults Closed For One Or More Settings
50 System Defaults Loaded For One Or More Settings
51 Container Passed With No Encoder Pulses
52 Container Less Than 10 Ms
53 Reject Watchdog Detected Queue Error
54 Reject Queue Count
58 Abnormally Large Container Detected
61 Reject Delay Position Error
66 Fill Level Reject Detection is Turned Off During Inspection
67 Diameter Missing Cap Error-Exceeded Consecutive Reject Limit
68 Diameter Missing Cap Error-No Encoder Pulse
72 Production Line Speed Too High
86 BBU RAM Battery is Low
87 Broken Slat Or Pin
88 Broken Slat Sensor Failure
89 Slat Sensor Is Off
90 Broken Slat Sensor Adjustment Error
* 91 Broken Slat Pushplate
117 Modbus Serial Interface Framing Error
118 Modbus Serial RX Overrun Error
119 Modbus Serial Parity Error
120 Modbus Serial RX Receive Rate Error
121 Modbus CTS Line Rate Error
* Activates alarm only when the Beacon Status function is set for High Priority Only.
To Next Page
Loading...
