EasyManua.ls Logo

Fire-Lite MS-9200UDLS - Page 14

Fire-Lite MS-9200UDLS
232 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 MS-9200UDLS/E/C Manual — P/N 52750:F 7/26/2010
Product Description Features and Options
• Touchtone/Rotary dialing
• Programmable Make/Break Ratio
• EIA-232 Printer/PC interface (variable baud rate)
• 80-character LCD display (backlit)
• Real-time clock/calendar with daylight savings time control
• History file with 1,000 event capacity
• Advanced fire technology features:
Automatic drift compensation
Maintenance alert
Detector sensitivity test capability (NFPA 72 compliant)
Automatic device type-code verification
Point trouble identification
• Waterflow selection per module point
• Alarm verification selection per detector point
• Walktest, silent or audible
• PAS (Positive Alarm Sequence) and Pre-signal per point (NFPA 72 compliant)
• Silence inhibit timer option per NAC
• Autosilence timer option per NAC
• Continuous, March Time, Temporal or California code for main circuit board NACs with two-
stage capability
• Selectable strobe synchronization per NAC
• Remote Acknowledge, Alarm Silence, Reset and Drill via addressable modules, ACS
annunciators or ANN-80 Remote annunciator
• Auto-program (learn mode) reduces installation time. Reports two devices set to the same
address
• Password and key-protected nonvolatile memory
• User programmable password
• Fully programmable from local keypad or optional keyboard
• Optional PK-CD (contains PS-Tools utility) for local or remote Upload/Download of program
and data
• Compatible with Fire-Lite’s newer series devices in LiteSpeed and CLIP mode (refer to SLC
Wiring Manual for a list of compatible addressable devices)
• Compatible with legacy Fire-Lite 300 Series devices in CLIP mode only (refer to the SLC
Wiring Manual for a list of compatible addressable devices)
• Optional 4XTMF module (conventional reverse polarity/city box transmitter)
• Optional ZNAC-92 Class A converter module for NACs
• ANN-BUS for connection to following optional modules (cannot be used if ACS annunciators
are used):
ANN-80 Remote Annunciator
ANN-80C Remote Indicator (Canadian Applications)
ANN-I/O LED Driver
ANN-S/PG Printer Module
ANN-RLY Form-C Relay Module
ANN-LED Annunciator Module annunciates alarm, trouble and supervisory (required for
Canada and emergency signaling)
ANN-RLED Annunciator Module annunciates alarms only
• Automated activation of the ACC-25/50(ZS/T) Audio-Command-Center

Table of Contents