Maintenance Instructions
Seite/Page 136 - Kaptitel/Chapter 7: Maintenance Instructions 16.1.15
7.16 Replacing the Stop Solenoid (Energize to stop)
NOTE:Representative procedureThe described procedure is representative for Fischer Panda
generators. The original location of the item must be taken
from the generator description of this manual. All
replacements and repairs should be done by a trained
person.
ATTENTION!Ensure that the generator cannot be started up
accidentally. Remove battery main switch.
For part numbers, refer to the spare parts catalogue.
Fig. 7.16-1: Stop solenoid1. Open the capsule.
01. Stop solenoid
Fig. 7.16-2: Stop solenoid2. Remove cable ties.
To Next Page
Loading...
