Inverter Panda PMGi 8000 / PMGi 10000
Seite/Page 218 - Kaptitel/Chapter 16: Inverter Panda PMGi 8000 / PMGi 10000 16.1.15
16.10.4 Overload - switch point
16.10.5 Short circuit
To operate the short circuit protection a fuse must be put in series with the live wire. The minimum requested feature
for this fuse are the following.
Note! The electrical Data refer to the system running in
accordance with all the limits defined in the
„General Specification“ table.
Output type Max. current Comments
230VAC 30,0A +/- 0.5A When protection takes place the engine must be switched off and all appliances
detached
Rated current 1.2 1.5 2.75 4.0 10.0
26A >1h <30min 5ms to 150ms 2ms to 15ms <2ms
To Previous Page