DC100 MAX Digital Dispenser Operating Manual
© 2023 Fisnar - 17 - DC100 MAX Rev 4
3.
When not being used, the syringe barrel
should be placed in the syringe barrel stand
provided. This will prevent the dispense tip from being accidentally damaged or having fluid
inside the syringe barrel flow back into the machine if it is placed horizontally on the work
surface.
The bottle it is placed into, allows any fluid that drips from the dispense tip to be safely
captured. The dispense tip is also protected in the bottle from any foreign contaminants or
environmental lighting that may affect the properties of the fluid within it.
4.
Purge trays are provided with the syringe stand to allow for a small amount of fluid to be
purged into a clean and contained location. This is also helpful when a new dispense tip is
attached to the syringe barrel or when checking for accurate fluid material flow. This is helpful
for ensuring optimum dispense results.
To Next Page
Loading...