FISNAR DC100 MAX - Cycle Delay

DC100 MAX Digital Dispenser Operating Manual
© 2023 Fisnar - 38 - DC100 MAX Rev 4
FUNCTION MENU
7. Cycle Delay
This function allows the user to set a delay time in between one dispense cycle ending and the next
dispense cycle automatically starting.
This function is used in conjunction when the machine is set and used in Cycle mode.
1.
When the Cycle Delay page is displayed, press the button to enter into the setting page for
the Cycle Delay.
2.
Use the or buttons to set the time value in seconds (s) that will be used as the Delay
Time in between dispense cycles.
3.
Press the button to exit the selected function setting.