DC100 MAX Digital Dispenser Operating Manual
© 2023 Fisnar - 21 - DC100 MAX Rev 4
The button can continue to be pressed to cycle
decimal place positions in a continuous scrolling cycle.
When the dispense time has been correctly set, press and hold the button
for approximately two (2) seconds to save the dispense time and exit back to the
home screen.
3.
Press the foot pedal or the button to actuate the machine and begin
dispensing fluid.
The dispense time will automatically start counting downwards from the set
dispense time until it reaches zero (0) seconds.
When the
dispense time reaches zero (0) seconds, the machine will
automatically stop dispensing and the dispense time will reset back to the set
dispense time.
The dispense cycle can be stopped before the dispense time reaches zero (0)
by pressing the button.
If the “Dispense Cancel” function has been enabled, the dispense cycle can also
be stopped before the dispense time reaches zero (0) by pressing the foot pedal
or the button.
To Next Page
Loading...