DC100 MAX Digital Dispenser Operating Manual
© 2023 Fisnar - 27 - DC100 MAX Rev 4
8. Dispense Count
Displays the total number of dispense cycles made per work cycle.
This counter is resettable.
9. Dispense Limit
Sets the total number of dispense cycles that the machine is able to
complete.
10. Dispense Time
Displays the total dispense time made per work cycle. This timer is
resettable.
11. Sequence
Allows the user to create and run a sequence of programs one after
the other
12. Shot Actuation
Sets if the dispense actuation signal will work as a momentary or
latching type.
13. Power Button
Sets if the machine automatically turns on when power is applied, or
switches on when the power button is pressed.
14. Language
Choose LCD display language.
15. Calibration
Calibrates the digital pressure and vacuum gauge to the atmospheric
and environmental conditions where the machine is being used.
16. Machine Reset
Resets the machine back to its factory default settings
17. Total Cycles
Displays the total number of cycles the machine has carried out. This
timer is not resettable.
18. Used Time
Displays the total number of hours the machine has been used. This
timer is not resettable.
19. Machine Copy Copies machine settings from one machine to another.
20. RS232 Port
Sets if the RS232 port is to work with a barcode scanner or be used
for external machine control.
21. Pressure Unit Sets the pressure unit displayed on the machine.
22. Vacuum Unit Sets the vacuum unit displayed on the machine.
23. Dispense Cancel
Allows the user to set if the dispense cycle can be cancelled before
the end of the dispense cycle is reached.
24. Change Password
Changes the password used to lock or unlock the machine controls
and function menu.
25. Operator Lockout Locks or unlocks the machine controls and function menu.
To Next Page
Loading...