DC100 MAX Digital Dispenser Operating Manual
© 2023 Fisnar - 36 - DC100 MAX Rev 4
6.
Press the button to exit the selected function setting.
7.
A letter “A” will be displayed on the home screen when this function is turned ON.
The Auto Purge Delay Time and Dispense Time can be seen counting down when the Function
display screen is selected.
8.
The Auto Purge Delay Time will begin counting down to zero (0) after the machine has been
actuated for the first time after exiting the function menu.
When the timer reaches zero (0), the machine will automatically actuate for the time set in the Auto
Purge Dispense Time parameter.
A letter “A” will flash on the home screen during the actuation of the Auto Purge Dispense Time .
If the machine is actuated before the timer reaches zero (0), then the machine will reset back to
the time set in the Auto Purge Delay Time parameter and begin automatically counting down to
zero (0), after the completion of the dispense cycle.
9.
The Auto Purge can be reset at any time by pressing the button or momentarily (two (2)
seconds) activating pin #16 of the I/O input circuit.
To Next Page
Loading...