FlexGain PLEX - Page 66

User’s manual FlexGain Plex, V2
Version 1.3 66 from 99
Constant of free time slots <FTSPAD> 0хFF
Position of 16TS <SIGBYTE> 16
Assignment of the Е1 LED with the corresponding Е1 stream
<PCMLED>
PCM1
Activity of alarm relays <ACO> OFF
Status of the hardware loop V.35 <EDL> OFF
Status of the local Е1 loop <LDL> OFF
Status of the remote Е1 loop <RDL> OFF
Clock mode of the V.35 port <V35CLKMODE> CODIRECTIONAL
Clock mode of the V.35 receiver <V35CLKRX> NORMAL
Clock mode of the V.35 transmitter <V35CLKTX> INVERS
Status of lines of the V.35 management port <SETLINE>
DCD = 1
DTR = 0
DSR = 0
TST = 0
FOLLOW = OFF
Free-channel constant <SIGBYTE> 0x54
Replacement constant <SIGBYTE> 0x55
Level of the noise suppresser <PORT>
10 mV
Signaling <SIGNALING>
TRANSPARENT
Rate RS-232
9600
Ethernet mode <ETHMODE>
10H
Voice port locking LOCK/UNLOCK <PORT>
LOCK
Event log <EVENT> Without changes
Device identifier <ID>
Without changes
Date <DATE>
Without changes
Time <TIME>
Without changes
Serial number <SN>
Without changes
MAC address <MAC>
Without changes
IP address <IP>
Without changes