Flexim FLUXUS WW - Page 135

A Menu structure FLUXUS WW
UMFLUXUS_WWV1-1EN, 2018-02-28 135
Program code
selection of the displays for the input of a program code
defining a program code
input of the break code (= program code)
input of the access code (= the first 3 digits of the program code)
After the input of HotCode 071001
input of the lower limit of the inner pipe diameter for the displayed trans-
ducer type
range: 3...63 mm
x
INIT-resis-
tant
Special Funct. ↕
set program code
set program code
------
INPUT BREAK_CODE
CODE: 000000
INP. ACCESS CODE
CODE: 000000
DNmin Q-Sensor
15 mm