Flexim FLUXUS WW - Page 134

FLUXUS WW A Menu structure
134 UMFLUXUS_WWV1-1EN, 2018-02-28
SYSTEM settings\Miscellaneous
selection of the display for the contrast setting
setting of the display contrast
Instrum. Inform.
selection of the displays for information about the transmitter
display of type, serial number and max. available data logger memory x
display of type, serial number and firmware version with date 
(dd - day, mm - month, yy - year)
x
Print Meas.Val.
selection of the displays for the transmission of stored measured values
to a PC
error message that no measured values are stored
start of the transmission of measured values
This display will only be indicated if the data logger contains measured
values and the transmitter is connected to a PC via a serial cable.
error message that there is a problem with the serial transmission
display of the data transmission progress
Delete Meas.Val.
selection of the displays for deleting stored measured values
confirmation for the deletion of measured values
This display will only be indicated if measured values are stored in the
data logger.
INIT-resis-
tant
SYSTEM settings↕
Miscellaneous
SETUP DISPLAY
← CONTRAST →
Special Funct. ↕
Instrum. Inform.
FLUXUS WW -XXXXXXXX
Free: 18327
FLUXUS WW -XXXXXXXX 
V x.xx dd.mm.yy
Special Funct. ↕
Print Meas.Val.
NO VALUES !
Print Meas.Val.
Send Header 01
................
SERIAL ERROR !
Print Meas.Val.
■ ■ ■ ■ ■ ■
................
Special Funct. ↕
Delete Meas.Val.
Really Delete?
no >YES<