Flintec FT-107 - Page 23

FT-107 Weighing Terminal, Technical Manual, Rev. 1.0.0, August 2019 Page 23 of 46
Auto Power off
The indicator is programmable for automatic power off to increase the battery life, if the scale is not used
for some period. Press Enter key 2 times in Configuration menu to access the backlight adjustment
item.
Press Enter key to enter the next item or press Esc key to return to step after selecting auto power off
by ▲ key.
* key usage
You can select this key function from the table below.
n
Disable.
PC
Piece count
In
Increased resolution
Gn
Temporary Gross indication in Net
Un
Unit change
An
Animal weighing
Press Enter key 3 times in Configuration menu to access * key item.
Press Enter key to enter the next item or press Esc key to return to previous step after selecting *
key function by ▲ key.
F key usage
You can select this key function from the table below.
n
Disable.
PC
Piece count
In
Increased resolution
Gn
Temporary Gross indication in Net
Un
Unit change
An
Animal weighing
n
Disable.
1
Automatic power off after 1 minute.
2
Automatic power off after 2 minutes.
3
Automatic power off after 3 minutes.
4
Automatic power off after 4 minutes.
5
Automatic power off after 5 minutes.