FLIR identiFINDER R200 - B1:Field Maintenance; Appendix B

Appendix B
Appendix B
This appendix details Field Maintenance and firmware installation for the FLIR identiFINDER R200.
B1:Field Maintenance
The FLIR identiFINDER R200 requires neither field maintenance nor field calibration.
Under no circumstances should any part of the housing be penetrated or removed.
If necessary, clean the instrument with a dry lint-free cloth.
After certain service intervals, send the FLIR identiFINDER R200 to a service organization for preventive
maintenance and performance optimization.
Store the FLIR identiFINDER R200 in a clean, dry location and, if possible, at room temperature.
9-104
identiFINDER® R200— ENGLISH (en) — 3/10/2017—1:38 PM