FLIR identiFINDER R200 - Menus

2.2.3 Menus
2.2.3 Menus
This chapter provides detailed descriptions of the FLIR identiFINDER R200’s menus and the settings that
define a personalized look and feel, and equally important, the commands used in expert analyses and
advanced operations.
Access to these commands and settings is achieved by navigating the menu hierarchy. Depending on
the variant, there are different entry points for the menu hierarchy.
Some FLIR identiFINDER R200 variants provide easy access to a few commands and settings without
password.
Figure 2-6 The "Splash" (or startup) screen.
After selecting the menu button , four selections are then displayed:
l Device,
l Radiation,
l Service,
l Data.
2-28 R200 3/10/2017__1:38 PM