Chapter 7 Using the Web Server
R200.FLIR ( http://172.16.0.1/ )
Link the FLIR identiFINDER R200 to a computer by first connecting the two through a USBport and then typing
"R200.FLIR" into the preferred browser. Or, just click the above link - r200.flir http://172.16.0.1/ to begin explor-
ing the FLIR identiFINDER R200 settings.
Both Firefox and Google Chrome will connect with the detector. For Internet Explorer users, ensure that version
11 or higher is installed.
7.1 The Home Page
After connecting the FLIR identiFINDER R200 to the computer, type "r200.flir" into the address field of the
preferred web browser (IE 11, Chrome or Firefox), and the home page then displays in the browser.
The key features of the home page are:
l System
¥
l Model
l Serial Number
l Software Verison
l Available Memory
l Spectroscopic Detector
l Service
l Contact information
¥
The information contained in the "System" section will be required should the occasion arise where a
service call becomes necessary. The information is also available on the FLIR identiFINDER R200 and
may be accessed by the "Menu" / "Service" / "Status" taskbar sequence.
7 - 77 R200 3/10/2017__1:38 PM
To Next Page
Loading...
