FLIR identiFINDER R200 User Manual

Method to transfer to remote server
Method to transfer to remote server
The information stored on the FLIR identiFINDER R200 may be transferred to a remote destination by
simply paring the detector with a cell phone and then transferring the information via that link.
Such information may include:
l spectra (RECORDS),
l screenshots (SCREENS),
l bluetooth logs (when logging is "ON", this data may be used for diagnostics) (LOGS),
l and web interface information.
This section details setting up the bluetooth connection.
Figure 3-13 Typical file management interface: Microsft File Manager illustrated here.
Pairing with Bluetooth Devices (Cell Phones)
Ensure the device targeted for pairing with the FLIR identiFINDER R200 is set so that Bluetooth pair-
ing/discovery is operational.
3-57 R200 3/10/2017__1:38 PM

FLIR identiFINDER R200 Specifications

General

Energy Range (Gamma)	30 keV to 3 MeV
Isotope Identification	Yes
Display	Color LCD
Battery Life	Up to 24 hours
Ingress Protection	IP67
Radiation Detection	Gamma
Dose Rate Range	0.01 µSv/h to 10 mSv/h
Weight	1.5 kg
Operating Temperature	-20°C to +50°C