FLIR identiFINDER R200 - Keys; Basic Commands; Command Definitions

2.2.1 Keys
2.2.1 Keys
The keypad is a four-button interface and is easily operated by the thumb or fingers.
Figure 2-5 The simple, four-button keypad.
2.2.2 Basic Commands
"Commands" are embedded in and executed by clicking one of the command icons, listed below.
Command Definition
Taskbar commands
Dose Rate Mode
Switch to "Finder"mode.
Radiation "Trefoil" - switches to "Identify"mode.
Trefoil "plus" - this extends the acquisition of spec-
trum.
l During "Identify" mode, selecting this command
from the taskbar extends the current ID to the
extended time, even when dynamic is turned
on.
l During nuclides, starts a new IDwith the exten-
ded time.
Command Definitions
R200 3/10/2017__1:38 PM 2–25