FLIR identiFINDER R200 - The FLIR Identifinder R200 Display

2.1 The FLIR identiFINDER R200 Display
2.1 The FLIR identiFINDER R200 Display
Figure 2-2 The "Home" display; in the system 's initial state, the desktop consists of Dose Rate (in Dose
Rate mode), and a status bar (top) and task bar (bottom) providing system status and navigation, respect-
ively.
The initial state of the system is conveniently set to "Dose Rate" mode.
The three main areas of the display are:
1. the "Status Bar" (top, displays battery status, password status (a padlock), time, and other system
status,
2. the central display, or "Desktop", and,
3. the "Task Bar", located in strip across the bottom and including the command menus (variable,
depending on mode set by the user). In the initial view, the options are "Finder","Trefoil" (radi-
ation symbol), and the "Menu" list.
2-16 R200 3/10/2017__1:38 PM