2.6 Resetting Values to Factory Presets
Figure 2-14 Navigating to "Clr Data", the options are available to Clear Spectra, Clear Alarms, and Clear
Sreens (sreen caps); confirm clear by selecting the checkmark, or cancel the clearing of data by selecting
the circled "X" in the "Confirm Erase" window.
Resetting factory preset values WILL reset the FLIR identiFINDER R200 password. Use care in the
application of this command. Ensure password is recorded if it is important to maintain the same pass-
word.
2-48 R200 3/10/2017__1:38 PM
To Next Page
Loading...
