Control Limit
Displays accumulated dose, elapsed time, and current
gamma dose rate".
Clear this accumulation by pressing the LEFTbutton on the
R200 (corresponding to the recycle command icon )
The FLIR identiFINDER R200 is launched into Finder
Mode when the command icon for "Finder" (
)is selected.
After taking the initial background reading, the detector switches to "Finder" mode.
Move the instrument around the vicinity of a suspected source and monitor the display, the
red LED, vibrator, and beeper of the FLIR identiFINDER R200 for changes. The annun-
ciation(s) (alarm(s)) frequency (vibration, sound and LED), become shorter in relation to
the proximity of source and instrument (as the two move closer to one another, the
sound/vibration/visual frequency becomes "tighter").
The LED, alternately, will change from a pulse to a solid "on" state as source and instru-
ment are moved closer to one another.
Figure 4-3 "Finder Background" desktop
screen elements including current count rate (duration).
Figure 4-4 Gamma enunciation (alarms, as they
are announced): visual, auditory, tactile.
4-63 R200 3/10/2017__1:38 PM
To Next Page
Loading...
