4.5 Acquiring Spectra from a Remote Platform via USB
Figure 4-11 Connection port (USB 2.0 Mini B) for charging and data transfer is located behind the port
cover at the base of the detector. Note the orientation of the cabling connector (wide-side of the con-
nector is imprinted with the USBsymbol and is aligned with the face (top) of the detector); this is to
ensure proper docking with the port.
The opposite end of the cable is a standard USBconnection, and should be connected to the computer.
R200 3/10/2017__1:38 PM 4–68
To Next Page
Loading...
