FLIR IP Series User Manual

Setup
5
To enable IP Conflict / Disconnection errors:
1. Under Event Type, select Disconnection or IP Conflict.
2. Check Enable to enable the selected warning type.
5.5 Storage
The Storage menu allows you to configure recording settings.
5.5.1 Record Schedule
The Record Schedule determines the schedule for video recording to SD / microSD card
or FTP.
To configure the recording schedule:
1. Click Setup next to the day you would like to configure.
2. Use the checkboxes if you want to copy the schedule to other days.
#LX400038; r. 1.0/18537/18537; en-US
42

FLIR IP Series Specifications

General

Sensor Type	Uncooled microbolometer
Weather Resistance	Yes
Video Compression	H.264, MJPEG
Power	PoE (IEEE 802.3af)
Spectral Range	7.5 – 13 μm
Thermal Sensitivity	< 50 mK
Video Output	Ethernet
IP Rating	IP66
Resolution	320 × 240 pixels
Frame Rate	Up to 30 Hz (varies by model)