FLIR IP Series User Manual

Setup
5
To select the recording destination:
1. Under Record or Snapshot, check Local to record to the microSD card, or check
FTP to record to FTP. For video recording or snapshot recording, you cannot record to
both microSD and FTP.
2. Click Save.
5.5.5 Local
The Local tab allows you to format or configure the microSD card installed in the camera.
• Click Read Only to set the microSD card on read only mode. This disables microSD
recording.
• Click Read & Write to enable recording on the microSD card.
• Click Hot Swap to unmount the microSD card if you would like to eject it from the
camera.
• Click Format and then click Yes to format the microSD card. The camera will reboot
once the format is completed.
5.5.6 FTP
The FTP tab allows you to set up settings for recording to an FTP server.
To set up FTP settings:
1. Check Enable to enable recording to FTP.
#LX400038; r. 1.0/18537/18537; en-US
45

FLIR IP Series Specifications

General

Brand	FLIR
Model	IP Series
Category	Security Camera
Language	English