FLIR IP Series

Connecting to Cameras with FLIR Cloud™ CMS
7
3. Log into the Client Software using the Client Software user name (default: admin) and
password (default: admin) and then click Login.
7.3 Adding a Camera over the Local Network (LAN)
You can add cameras over a local network (LAN). The software will automatically scan the
network for compatible cameras.
Prerequisites:
• Connect the IP camera to a router or switch on the network.
• Install FLIR Cloud™ Client on a computer in the same network as the IP camera.
To add a camera over the LAN:
1. Click
and then click .
2. The client scans your LAN for connected cameras. Check your camera (a) and click
Add (b).
3. Enter the password for your system (default: admin) and click OK.
4. Click
then .
#LX400038; r. 1.0/18537/18537; en-US
59