FLIR IP Series User Manual

Using FLIR Cloud™ Client for PC or Mac
8
8.3.4 PTZ Scan
Scan automatically cycles between a left and right point.
To set up scan mode:
1. Click
to open the Advanced controls. Select Scan.
2. Move the camera to the desired left position and click .
3. Move the camera to the desired right position and click
.
To run scan mode:
1. Click
.
8.3.5 PTZ Pan
Pan makes the camera continuously pan 360°.
To run Pan mode:
1. Click
to open the Advanced controls. Select Pan.
2. Click
.
8.4 Playback
You can use Playback mode to playback video saved on systems connected to the client.
To access Playback mode:
• Click
and then click to create a Playback tab.
#LX400038; r. 1.0/18537/18537; en-US
70

FLIR IP Series Specifications

General

Sensor Type	Uncooled microbolometer
Weather Resistance	Yes
Video Compression	H.264, MJPEG
Power	PoE (IEEE 802.3af)
Spectral Range	7.5 – 13 μm
Thermal Sensitivity	< 50 mK
Video Output	Ethernet
IP Rating	IP66
Resolution	320 × 240 pixels
Frame Rate	Up to 30 Hz (varies by model)