FLIR ThermaCam P25 User Manual

12.1 Internal battery charging
To charge the battery internally, follow the instructions below.
ActionStep
Make sure that the battery is correctly inserted into the camera.1
Connect the power supply cable to the camera.2
The message Charging battery will appear on the screen.3
While charging, the battery status symbol will pulse until the battery is fully charged.4
12
86 Publ. No. 1557978 Rev. a155 – ENGLISH (EN) – February 6, 2006
12 – Electrical power system

FLIR ThermaCam P25 Specifications

General

Brand	FLIR
Model	ThermaCam P25
Category	Thermal cameras
Language	English