FLIR ThermaCam P25 User Manual

➲ For protective reasons, the LCD will be switched off if the detector temperature
exceeds +60 °C (+149 °F) and the camera will be switched off if the detector temper-
ature exceeds +68 °C (+154.4 °F)
10.2.5.4 Status bar
10392903;a3
Figure 10.31 Status bar dialog box
Figure 10.32 Explanations of the Status bar dialog box
CommentsValueLabel
Move the joystick left/right to enable/disable this
label on the status bar.
■
On
■
Off
Date/time
Move the joystick left/right to enable/disable this
label on the status bar.
■
On
■
Off
Distance
Move the joystick left/right to enable/disable this
label on the status bar.
■
On
■
Off
Emissivity
Move the joystick left/right to enable/disable this
label on the status bar.
■
On
■
Off
T Reflected
Move the joystick left/right to enable/disable this
label on the status bar.
■
On
■
Off
T Atmosphere
Move the joystick left/right to enable/disable this
label on the status bar.
■
On
■
Off
Relative humidity
Move the joystick left/right to enable/disable this
label on the status bar.
■
On
■
Off
Range
Move the joystick left/right to enable/disable this
label on the status bar.
■
On
■
Off
Lens
Move the joystick left/right to enable/disable this
label on the status bar.
■
On
■
Off
Zoom
10
80 Publ. No. 1557978 Rev. a155 – ENGLISH (EN) – February 6, 2006
10 – Camera program

FLIR ThermaCam P25 Specifications

General

Brand	FLIR
Model	ThermaCam P25
Category	Thermal cameras
Language	English