3 Welcome!
Thank you for choosing the ThermaCAM™ P25 infrared camera.
The ThermaCAM™ P25 infrared condition monitoring system consists of an infrared
camera with a built-in 36 mm lens, and a range of accessories. The infrared camera
measures and images the emitted infrared radiation from an object. The fact that ra-
diation is a function of object surface temperature makes it possible for the camera
to calculate and show this temperature.
The ThermaCAM™ P25 camera is dust- and splash-proof and tested for shock and
vibration for use in the most demanding field conditions. It is a handheld, truly portable
camera, which is lightweight and operates for more than two hours on one battery
pack. A high-resolution infrared color image is provided in real-time in the integral
viewfinder.
The camera is very easy to use and is operated by using a few buttons which are
conveniently placed on the camera, allowing fingertip control of major functions. A
built-in menu system also gives easy access to the advanced, simple-to-use camera
software for increased functionality.
To document the object under inspection it is possible to capture and store images
on a removable CompactFlash card. The images can be analyzed either in the field
by using the real-time measurement markers built into the camera software, or in a
PC by using FLIR Systems's software for infrared analysis and reporting. This makes
it very easy to create complete survey reports (containing numerous infrared images,
photos, tables etc.) from the inspections.
3
Publ. No. 1557978 Rev. a155 – ENGLISH (EN) – February 6, 2006 5
To Next Page
Loading...
Need help?
General
