8.4 Changing level & span
8.4.1 Changing the level
ActionStep
Press the joystick to display the horizontal menu bar.1
If the camera is in continuous adjust mode, point to Manual adjust on the Image
menu and press the joystick.
2
Change the level by moving the joystick up/down. An arrow pointing upwards or
downwards will be displayed.
3
Press the joystick to leave level/span mode.4
➲ You can also change the level by pointing to Level/Span on the Image menu, and
then change the level by moving the joystick up/down.
For more information about level, see section 10.2.4.3 – Level/Span on page 75.
8.4.2 Changing the span
ActionStep
Press the joystick to display the horizontal menu bar.1
If the camera is in continuous adjust mode, point to Manual adjust on the Image
menu and press the joystick.
2
Change the span by moving the joystick left/right. Two arrows pointing away from
each other or towards each other will be displayed.
3
Press the joystick to leave level/span mode.4
➲ You can also change the span by pointing to Level/Span on the Image menu, and
then change the span by moving the joystick left/right.
For more information about span, see section 10.2.4.3 – Level/Span on page 75.
8
Publ. No. 1557978 Rev. a155 – ENGLISH (EN) – February 6, 2006 45
8 – Tutorials
To Next Page
Loading...
Need help?
General
