Issue 13 CWT Compact Touch Installation and Maintenanace Manual Page 23
If an object, or part of an object, remains in the coin slot opening as shown in the
figure above, the barrier plate will stop against this object but will close as soon
as the object is removed.
Important:
The function of the coin system may be interrupted if the terminal leans too much
in any direction.
If an object, or part of an object, is inserted and prevents the trap door from
closing, this will be detected. The coin system will try to remove the object, if it
doesn’t succeed the terminal will send an alarm to CWO.
4.1.3.2 Coin verifier
The coin verifier reveals if valid coins have been used. The verifier also includes
sophisticated electronics for determining what type of coin is passing.
Figure 7, Metal object stuck in the coin slot.
Trap door
Barrier plate
To Next Page
Loading...