Power Recorder
Safety Information
3
To register your product, visit http://register.fluke.com
.
To view, print, or download the latest manual supplement, visit
http://us.fluke.com/usen/support/manuals
.
To contact Technical Support: fpqsupport@fluke.com
or 888-257-9897
Safety Information
See the Specifications section of the Operators Manual for a full agency
compliance list. Table 1 lists symbols that appear on the Recorder and in this
manual.
Warning
To prevent possible electrical shock, fire, or personal
injury:
• Carefully read all instructions.
• Do not work alone.
• Do not use the Product around explosive gas, vapor, or
in damp or wet environments.
• Use only insulated current probes, test leads, and
adapters as supplied with the Product.
• Examine the case before you use the Product. Look for
cracks or missing plastic. Carefully look at the
insulation around the terminals.
• Remove all probes, test leads, and accessories that are
not necessary for the measurement.
• Make sure the ground conductor in the mains power
cord is connected to a protective earth ground.
Disruption of the protective earth could put voltage on
the chassis that could cause death.
• Only use probes, test leads, and accessories that have
the same measurement category, voltage, and
amperage ratings as the product.
To Next Page
Loading...
Need help?
General
