Fluke 1750 Getting Started Guide

Power Recorder
Downloading Data and Erasing Memory
21
You can also tap the Erase 1750 Memory from the Data menu option which is
available under Menu, and tap the Erase All button to erase all power quality
data stored in the Recorder. Even then, if you want, you can leave old data in
Recorder memory. It will be overwritten automatically when you start your
next Recorder session, so it never has an adverse effect on recorded data
quality or quantity.
azd109s.bmp
When you choose to Erase All, the following popup caution “Are you sure?”
appears on the screen.

Fluke 1750 Specifications

General

Type	Power Quality Analyzer
Frequency Measurement Range	42.5 Hz to 69 Hz
Safety Rating	CAT IV 600 V, CAT III 1000 V
Accuracy	±0.1% of reading
Harmonics	Up to 50th harmonic
Communication	Ethernet, USB
Power Supply	100 V to 240 V AC
Channels	4 voltage, 4 current
Battery Backup	Yes, internal battery
Measurement Parameters	Voltage, Current, Power, Harmonics, Flicker
Data Logging Interval	1 second to 60 minutes
Battery Life	45 minutes (UPS)
Voltage Measurement Range	1 to 1000 V (phase to neutral)
Operating Temperature	-10 to 50 °C