Fluke 45 - Page 183

Index (continued)
3
remove the analog measurement processor
shields, 3-9
remove the battery option, 3-10
remove the display pca, 3-8
remove the front panel assembly, 3-8
remove the ieee-488 option, 3-9
remove the main pca, 3-9
remove the meter case, 3-7
remove the rms pca, 3-10
removing the ieee-488 option, 8-8
replacing the 10 a input fuse, 3-6
replacing the 100 ma input fuse, 3-5
required equipment, 3-3, 4-3
retrieving calibration constants, 5-21
rom, 2-20
rs-232 interface, 2-19, 4-15
—S—
schematic diagram, 7-14, 8-12
serial communication (guard crossing), 2-3, 2-18
servicing surface-mount assemblies, 5-3
setup, 4-15
specifications, 1-6, 7-3
Specifications, 1-6
static safe handling, 3-3
switching power supply, 7-5
—T—
testing current input fuses, 3-4
the calibration procedure, 4-18
theory of operation, 7-3, 8-3
troubleshooting, 7-13, 8-10
—U—
uart test, 5-13
—W—
warranty repairs and shipping information, 3-3
watchdog timer and reset circuit, 2-21