Fluke 9100 - 4.16 Logic-Pulses Function - Operation

Section 4: Using the Model 9100: Logic-Pulses Function 4.16-1
Final Width = 215mm
4.16 Logic-Pulses Function — Operation
4.16.1
This sub-section is a guide to the use of the 9100 for generating logic pulses with defined
pulse width and repetition interval. The following topics are covered:
4.16.2 Selection of Logic-Pulses Function.
4.16.2.1 'Aux' Key.
4.16.2.2 Default Settings.
4.16.3 Screen Keys.
4.16.3.1 Bottom Screen Keys.
4.16.3.2 Right Side Screen Keys.
4.16.4 Value Editing.
4.16.4.1 'Pulse Width' and 'Repetition' Time-Intervals.
4.16.4.2 'Pulse Width' and 'Repetition' Time-Interval Editing.
4.16.5 Crossing Thresholds.
4.16.5.1 Time-Interval Resolution Thresholds.
4.16.5.2 Hardware Configurations.
4.16.6 'Logic-Pulses' Routines for Calibrating UUTs.
4.16.6.1 Interconnections
4.16.6.2 Using the 9100 as a Fixed Source
4.16.6.3 Using the 9100 as an Adjustable Source
In this sub-section, we deal with the full range of 'Pulse Width/Repetition Interval'
facilities, in a concise way. For those who require more detailed instructions for
manipulating the front panel controls, the DC Voltage function was used as an example
for the general familiarization tutorials in Section 3.